Replacing rhinestones

Instructions for replacing missing rhinestones:

These instructions are specifically for the spare rhinestones included with your item and we cannot guarantee that they will work with any other rhinestone variety.

Step 1: Heat Iron to a medium temperature, not above a cotton setting
 
Step 2: Place the rhinestone onto the desired area- we recommend using tweezers to do this if possible
 
Step 3: Carefully place the tip of the iron over the rhinestone and hold still. Hold in place for 10 seconds, ensuring the rest of the iron is held up and doesn't burn the fabric at any point
 
Step 4: Place a cotton bed sheet, pillowcase or tea towel over the rhinestone area and press down on the item again for a further 5 seconds.
 
Step 5: The rhinestone should now be secure! Please check that the rhinestone is securely in place, and revisit the last step if this is not the case. 
 
** please note when caring for your item, the rhinestone design should not usually be ironed over, as moving the iron across the design could dislodge the rhinestones
 
Moving forward please follow the full care instructions to help protect the design: 
Machine washable at max 30°C. Gentle cycle, always wash with similar colours. We recommend turning the garment inside out when washing to protect the design. Do not bleach. Hang to dry. Do not iron over design.

 

The reapplication of rhinestones is at your own risk and we cannot be held responsible for any damages caused as a result. 

Unfortunately, we are unable accept any returns or exchanges for items that have had rhinestones reapplied to.